Welcome to Crazed Creations by Crystal Tutorials!
I have been hunting down all of my tutorials for a few years now,
and finally I was able to locate them just the other day.
Some things to know about these tutorials... 
Most of them are missing links to supplies, whether it is 
because an artist or designer has retired, tagger's blog has 
been deleted etc. In this case, please treat the tutorial
as inspiration. As I update each tutorial, I will slowly re-release them.
ALL Tutorials before 2024 are AI FREE, meaning no AI was used.
and all newer tutorials will be labelled accordingly.

Any and all Tutorials posted within this site
are of my own creation.
Any similarities to any other is purely coincidental.
 DO NOT CLAIM AS YOUR OWN!
You are allowed to use them as challenges within your forum 
by linking back to this site.
I hope you enjoy the tutorials that I have created.
Please feel free to leave comments and or suggestions!!!
Some tips...
I use abbreviations in my tutorials, 
the more common ones are below:
C&P~Copy and Paste
RS~Re-size
DS~Drop Shadow
MW~Magic Wand
Showing posts with label Artist: VeryMany. Show all posts
Showing posts with label Artist: VeryMany. Show all posts

Northern Exposure

 


This tutorial was written on December 4, 2025.

Supplies:

Northern Exposure scrap kit by Horseplay's Pasture Designs - HERE

Cozy Morning #13 by VeryMany - HERE

Mask of Choice

Canvas Size:

700x700

Step by Step:

1. Open Paper 18…Selections/All…C&P paper into selections and apply your mask of choice
Layers/New Mask Layer/from Image/Merge Group
2. Element 11…C&P as a new layer…MW the inside of the frame…Selections/Expand by 15
3. Paper 3… Add a new layer and C&P paper 3 into selection of the new layer…Slide this layer under the frame layer
4. Close Up Tube… Using your tube RS and place under the frame….Delete any portion of the close up that sticks out from under the frame
Adjust the layer style to Hard Light with a 55% Opacity
5. Full Tube…C&P your full length tube to either left or right of the frame
6. Element 8…C&P as a new layer…RS by 90% x3…Duplicate and arrange above the Mask layer
7. Element 9…C&P as a new layer…RS by 90% x3…Duplicate and arrange above the Frame layer
8. Element 10…C&P as a new layer…Align Horizontally Centered on the bottom of the frame
9. Element 28…C&P as a new layer…Align along the bottom of the full tube… She is going to look like she is sitting in a snowy patch
10. Element 35 Word Art… C&P where you would like your word art at
11. Add your © and name and you are complete



Blue Diva


 This tutorial was written by Chasunicorn
on December 23, 2012.
*Updated November 2025*
Supplies:
Tube by Verymany *Exclusive* HERE
Kit by Abstract Creations
Template 225 by Denny HERE
Mask of choice
Filters:
Toadies~ What Are you?
VM Natural~ Ripper
Xero: Fritillary
Drop Shadow:
Whatever you prefer
Template:
Duplicate template and close the original
*Delete the credit layer.
*Close out all the layers except the last layer
(I always work from the bottom to the top,
you can work however you like.)
*Back...MW...C&P paper 2 into selection...Apply
your mask of choice...Merge Group
*Dotted Lines...Apply a small amount of noise
*Wide Pink Strips...MW...flood fill with a
light color from the kit
Apply VM Natural~ Ripper Default Settings
*Thin Pink Strips...MW...flood fill with a
darker color from the kit
Apply Xero: Fritillary...Settings 3/58/79/188
*White Strip...Apply a small amount of noise
*Pink Squares...MW...flood fill with a
light color from the kit
Apply VM Natural~ Ripper Default Settings
*Small Circle...MW...flood fill with a
light color from the kit
Apply VM Natural~ Ripper Default Settings
*Circles...MW...flood fill with a
darker color from the kit
Apply Toadies~ What Are you? Default Settings
*Frame Back...C&P paper 5 into selection
Add your close up...Invert/Delete/Deselect
Duplicate 3x's...Original/Blend/Luminance (L)/Opacity 65%
2nd Copy...Adjust/Blur/Guss 4%/Blend Soft Light/Opacity 65%
3rd Copy...Adjust/Blur/Guss 4%/Blend Hard Light/Opacity 45%
*Frame...Apply a small amount of noise
Add your preferred Tube where you think it looks best
C&P Elements:
*Element 11...C&P behind you tube
*Frame 2...RS 85%...Place behind the Wide Strip layer
*Element 19...Place behind the buildings
Erase any part of the rose that sticks out the bottom
Duplicate/Mirror and move the copy slight higher than the Original
*Word Art 1...RS 85% 3x's...Sharpen...Place in front of the buildings
to the left
*Element 8...RS 45%...Place in front of the word art
Add any other elements you like
Add your name, Copyright info and Watermark
Re-Size your tag if you want to and you are done

Steam Punker


This Tutorial was written by Chasunicorn
on May 3, 2013.
*Updated November 2025*
Supplies:
Tube by Verymany HERE
This tube is not in her store but 
I linked all of her Steampunk Tubes 
Scrap Kit by Gimptastic Scraps
This kit is unavailable but any Steampunk Kit should work
Template #173 by Elegant Inspirations HERE
Mask (4th one) by Jus Graphix HERE
Rust Texture of choice
(I am using a Texture by GrungeTexture HERE)
Filters:
Gradient Glow (Optional)
Drop Shadow:
Whatever you prefer
Template:
**Open template and Duplicate
Close original and delete Credit layer
**Close out all layers except the background layer
(I tend to work from the bottom to the top)
*Background Layer...MW and C&P into selection Paper 6
Apply your mask
*Black Circle Rects Layer...MW and C&P into selection Paper 7
*White Stripes Layer...Change Blend Mode to Overlay
*Grey Circles Layer...MW and C&P into selection Paper 4
*White Circles Layer...MW and C&P into selection your Rust Texture
*White Dotted 4 Layer...Change Blend Mode to Soft Light
*Pink Circle Rect Layer...MW and C&P into selection Paper 1
Using your Light/Dark Tool Darken Paper 1
*Black Circle Rect Layer...MW and C&P into selection Paper 7
*Lt Pink Circle Rect Layer...MW and C&P into selection your Rust Texture
*White Dotted 3 Layer...Change Blend Mode to Soft Light
*Grey shape Layer...MW and C&P into selection Paper 4
*Pink Circle Layer...MW and C&P into selection Paper 1
Using your Light/Dark Tool Darken Paper 1
*Black Circle Layer...MW and C&P into selection Paper 7
*White Dotted 2 Layer...Change Blend Mode to Soft Light
*White Circle Layer...MW and C&P into selection your Rust Texture
*White Dotted 1 Layer...Change Blend Mode to Soft Light
**Add a small Grad Glow to all the shapes except the dotted lines
(Optional)
C&P Elements:
*Deco 1...C&P as a new layer...Erase any part that looks cut off
Place this element above the Black Circle Rects Layer
Duplicate/Flip/Mirror
*Deco 2...C&P as a new layer...RS if needed...
Image/Rotate/90% to the left
Place this element above the Black Circle Rect Layer to either side
Duplicate/Mirror
*Gear 2...C&P as a new layer...RS 85% 2xs...Place to the left of the tag
*Gear 1...C&P as a new layer...RS 85% 2xs...Place by the stack of gears
to the left of the tag...Give it a slight tilt to the left
*Mask...C&P as a new layer...RS 65% and again by 85%...Place to
the right of the tag
*Feather...C&P as a new layer...RS 85% 2xs...Place under the Mask
*Nail...C&P as a new layer...Image/Rotate/90% to the left...Place
to the left of the tag
*Eye...C&P as a new layer...Place to the left of the tag behind the Grey shape
*Leaf...C&P as a new layer...Place to the Right of the tag behind the Lt Pink Circle Rect
*Bullet...C&P as a new layer...RS by 75%...Image/Rotate/90% to the left
Place behind the feather and mask
*Chain...C&P as a new layer...RS by 75%...Place towards the top of the tag
Erase a portion of the chain...Select/Float/De-float
*Word Art...C&P as a new layer...RS by 75% 2xs...Give it a slight tilt to the left
above the chain...Erase just a small portion so it looks
like the chain is lifting the word art
Add your preferred Tube where you think it looks best
Add your name, Copyright info and Watermark
Re-Size your tag if you want to and you are done