Welcome to Crazed Creations by Crystal Tutorials!
I have been hunting down all of my tutorials for a few years now,
and finally I was able to locate them just the other day.
Some things to know about these tutorials... 
Most of them are missing links to supplies, whether it is 
because an artist or designer has retired, tagger's blog has 
been deleted etc. In this case, please treat the tutorial
as inspiration. As I update each tutorial, I will slowly re-release them.
ALL Tutorials before 2024 are AI FREE, meaning no AI was used.
and all newer tutorials will be labelled accordingly.

Any and all Tutorials posted within this site
are of my own creation.
Any similarities to any other is purely coincidental.
 DO NOT CLAIM AS YOUR OWN!
You are allowed to use them as challenges within your forum 
by linking back to this site.
I hope you enjoy the tutorials that I have created.
Please feel free to leave comments and or suggestions!!!
Some tips...
I use abbreviations in my tutorials, 
the more common ones are below:
C&P~Copy and Paste
RS~Re-size
DS~Drop Shadow
MW~Magic Wand
Showing posts with label Artist: Arthur Crowe. Show all posts
Showing posts with label Artist: Arthur Crowe. Show all posts

Autumn Breeze



This tutorial was written by Chasunicorn

on September 5, 2013.

*Updated on May 22, 2026

Supplies:

Tubes by Arthur Crowe

Autumn Sunset Scrap Kit by BitsnBobs

Mask of Choice

Filters:

Xero~ Fritillary

Drop Shadow:

Whatever you prefer

Canvas Size:

700x700

C&P Elements:

*Mask Layer...MW and C&P into selection paper 8

Apply your Mask of Choice

*Element 80...C&P as a new layer...RS by 85%

*Frame Backs...MW into each section of the frame

Select/Modify/Expand by 4...Flood Fill with a color from your kit...

Repeat for the other section of the frame...Apply Xero~Fritillary

use the settings you like

*Close up tubes....MW into each section of the frame

Select/Modify/Expand by 4...C&P as a new layer your tube or tubes

On each tube duplicate...on the original change the blend mode to Luminance (L)

On the copy Adjust/Blur/Gaussian 4.00 and change the blend mode

to either overlay or Soft Light...I used one on each of my copies.

*Element 40...C&P as a new layer...Place behind the frame to the left

of the tag...Duplicate/Mirror...RS the copy by 85%...Merge Down

*Element 38...C&P as a new layer...Place above your mask to the top right

Duplicate/Flip/Mirror and Merge Down

*Element 59...C&P as a new layer...Place above your frame to the left

Duplicate and scatter to you liking...Merge Down

*Element 73...C&P as a new layer...RS by 75% 2xs...Place on the top of your frame

Slide towards the bottom of the frame

*Element 56...C&P as a new layer...RS by 65% 2xs...Place to the top right

corner of your frame...Duplicate/Mirror and place the  copy in the bottom

left corner of your frame...Merge Down

*Element 61...C&P as a new layer...RS by 65% 2xs...

Place to the bottom left corner of the frame

Add your preferred Tube where you think it looks best

Add your name, Copyright info and Watermark

Re-Size your tag if you want to and you are done 

Real Rock


 Tutorial written by Chasunicorn

On March 11, 2012

*Updated on January 27, 2026*

Supplies:

Tube by Arthur Crowe

Template by Cakes

Skullz N Stripes by Tasha's Playground

Filters:

Eye Candy~Grad Glow (Preferred Settings)

Drop Shadow:

Preferred Settings

Template:

*Layer 7...MW/Expand 2...C&P paper 7 into selection

*Layer 6...MW/Expand 2...C&P paper 15 into selection

*Layer 5...MW/Expand 2...C&P paper 4 into selection

*Layer 4...MW/Expand 1...C&P paper 2 into selection

*Layer 3...MW/Expand 1...C&P paper 14 into selection

*Layer 2...MW/Expand 1...C&P paper 3 into selection

*Delete Layer 1

*Add Grad Glow to all layers (Shapes), this is optional!

C&P Elements:

(Use your imagination if my placement and elements are not to your taste.)

*Frame 1...add above the Circle in Layer 4

*Frame 2...RS 85%...Place above the Circle in Layer 2

*Scatter...Paste above Layer 5...Duplicate/Mirror & Flip...Merge Down

*Dot Scatter...Paste above Layer 7...Duplicate/Mirror & Flip...Merge Down

*Cityscape...RS 110% x2...slide to the right just a lil bit

*Add your tube (RS if needed)

*Hat...RS 75%...Place in front of your tube

*Drink...RS 65%...Place behind the Hat

*Bottle...RS 65%...Place in front of the Hat

*Drink 2...RS 65% and then again 85%...Place behind the Hat.

*Move the Templates Word art to the Top Right Corner

Add Grad Glow if you prefer.

Add your name, Copyright info and Watermark

Re-Size your tag if you want to and you are done!

Music Is My Life


 This tutorial was written by Myself

on April 6th, 2012.

*Updated on January 27, 2026*

Supplies:

Tube is by Arthur Crowe

Scrap Kit~ DJ Love by Bibi's Collection

Drop Shadow:

1/-2/50/5/Black

Canvas Size:

700x700

C&P Elements:

*57...Slide up some on the canvas

*10...RS 55%...Duplicate/mirror...Merge down

MW...Click inside frame sections...Add New Raster

C&P paper 2 into selection...Deselect

*89...RS 75%...Place behind the frame

*Close Up of your tube...RS if needed place under the frame

lower Opacity 72%

*Place your full body tube where you like.

Now for some elements:

*62&63...place behind you main tube...I stacked a bit

topsey turvey for a fun look

*42...RS 65%...place behind speaker elements...Opacity 62%

*17...Mirror...Free Rotate/90%/Right

Click on the main tube layer Select/Float/Defloat... click on the cluster of music notes

and erase anything in the selected area...I left a small layer

by her hand to have it look like it was coming from behind.

*32...RS 65%...place behind the cluster of music notes...slide to the right and mirror

*69...RS 65% x2...place place on the tubes foot...erase

just enough for the look of it resting on her shoe

Add your name, Copyright info and Watermark

Re-Size your tag if you want to and you are done

Look Calm


This tutorial was written by Chasunicorn

On May 26, 2012.

*Updated November 2025*

Supplies:

Tube by Arthur Crowe's May Calendar Tube

Not seen him since his own store

Template: Dees' Sign Depot

Kit by Alikas Scraps

This Designer seems to have retired

Mask of Choice

I am using an Exclusive Mask for ACDivas by Artmama 

Filters:

Dsb Flux~Bright Noise/Add Noise

Photo Effex~Scanlines

Eye Candy 5: Texture Noise

Gradiant Glow

Drop Shadow:

-1/-3/42/6/Black

(adjust to fit your likes)

Template:

 (Remember to Deselect after each layer)

*Duplicate Template and close the original

*Raster 1....MW layer...C&P into selection paper 11...

appy your mask...Layers/New Mask/From Image...Merge Group

*Halftone...Select All/ Float/ Defloat...Fill with a color

from your tube or kit...Add Noise/dsb flux: Bright Noise (your own settings

that you like)

*Brown Oval...MW...C&P into selection paper 8

*Blue Rectangle...MW...C&P into selection paper 6

*Green Square...MW...C&P into selection paper 9

*Raster 2...Add Noise/dsb flux: Bright Noise (your own settings

that you like)

*Beige Circle...MW...Fill with a color from your tube or kit...

Photo Effex: Scanlines with these settings 3/5/25/17/100

*Brown Square Strips...MW...C&P into selection paper 7

*Small Blue Square...MW...C&P into selection paper 9...

Eye Candy 5: Texture Noise (your own settings that you like)...

Add a portion of your tube to this layer Select All/ Float/ Defloat/

Invert/Delete/ Deselect...Opacity 72%...Blend Mode Luminance (L)

*Raster 3...Delete

*Small Green Circle...MW...C&P into selection paper 10...

Penta: Color Dot Default Settings

**Add Gradiant Glow to all layers you have modified

except halftone, Beige Circle and Bullet Holes

C&P Elements:

 (Remember to add your own spin if you would like)

*Element 32...Place above Beige Circle and RS 95%

*Element 41...Place above Green Square

*Element 3...RS 75%x2...Move to the right...Mirror/Flip...

Merge Down...Place above the frame

*Element 2...RS 75%...Place above Small Green Circle...

Move towards the bottom of the canvas

*Element 9...RS 75%...Place to the left of the tag near the bottom

*Element 7...RS 85%...Place in front of the cupcake

*Element 10...RS 85%x3...Image/Free Rotate/30%/Right...

Place behind the cupcake

*Element 14...Place behind Lollipop

*Element 36...RS 85%x3 place in front of the other Cupcake

*Element 46...RS 85%x3 Place above Small Green Circle

*Element 62...Place above the layer bullet holes...Duplicate and Flip

Add your preferred Tube where you think it looks best

Duplicate...Gaussian Blur at 5...Blend mode Hard Light

Add your name, Copyright info and Watermark

Re-Size your tag if you want to and you are done